Earth Stove Combustor Guide
Prior to ordering a new combustor for your Earth Stove woodstove, remove the old combustor and verify the dimensions to ensure that you are
ordering the correct size. Note: The dimensions of Condar combustors may differ slightly from the existing combustor in your stove. Keep in mind
that unless these dimensions differ significantly, stove performance will not be impacted.
Earth Stoves 1000C
The 1000C is the only stove manufactured by Earth Stove that uses a round combustor. The stove requires a combustor that is 6 in round by 2 in
thick, with 25 cells per square inch and wrapped with a stainless steel can. It is wrapped with extra gasket outisde the can at no extra charge.
|Item # CC-001 (ceramic): $129.00
||Item # CS-001 (steel): $176.00
Earth Stoves Manufactured Before 1990
The 1002C, BV400C (pre 1990) and the BV4000C (pre 1990) all use the CC-253 combustor. With the 1002C you should retain the housing.
It comes out with the combustor and could accidentally be tossed out with the wornout combustor. The stove requires a combustor that is 2.5 inches by
15.3 inches by 2 inches, with 16 cells per square inch and uncanned.
|Item # CC-253 (ceramic): $206.00
The 1005 stove and the BV450C insert uses the CC-256. The 1005, the BV450C insert and the 1000C are the only Earth Stoves that call
for canned combustors. The stove requires a combustor that is 2.5 inches by 15.3 inches by 3 inches 16 cells per square inch and canned.
Earth Stoves BV400C and BV4000C have a burn time of 8 to 12 hours and a BTU output from 6,500 to 48,000 range. They can heat an
area of 2,000 to 2,400 square feet. The stove requires a combustor that is 2.5 inches by 15.3 inches by 3 inches 16 cells per square inch, uncanned.
The 1003C stove has a deep firebox which is a direct descendant of the original Earth Stove design and has been engineered to
be a very efficient catalytic stove. It has a large ash drawer which allows for easy maintenance. The stove requires a combustor that is 2.5 inches by
15.3 inches by 3 inches, with 16 cells per square inch, uncanned.
The Traditions T150C, T100 and the Pioneer all encompass two combustors. The Traditions T150C has a large bay window for better
fire viewing and can handle up to 22" logs in the firebox. The stove requires a set of two combustors measuring 3.5 inches by 4.8 inches by 2 inches,
with 16 cells per square inch, uncanned.
About half of the Earth Stove stoves and inserts are designed to accommodate a catalytic thermometer for monitoring the performance of your
combustor. Visit our woodstove thermometers page for more
It is best to check your owner's manual or remove your old combustor to insure you are ordering the correct size. The Earth Stove product line was
purchased by Lennox Company. They no longer produce catalytic woodstoves. We market replacement catalytic combustors and CatGard gasket, but do not
offer other replacement parts for Earth Stoves.
If an error is discovered in this information, or you have additional helpful information about the installation of replacement catalytic
combustors in your woodstove, please feel free to contact Carolyn Greene, Plant Manager at Condar's
factory in North Carolina.
© Condar Company. All rights reserved. Images of combustors © Condar Company. Images of stoves © their
respective manufacturers, used herein for consumer reference only. Prices and specifications subject to change.