Combustor Guide
Prior to ordering a new combustor for your Blaze King woodstove, remove the old combustor and verify the dimensions to ensure that you are ordering the correct size. Note: The dimensions of Condar combustors may differ slightly from the existing combustor in your stove. Keep in mind that unless these dimensions differ significantly, stove performance will not be impacted.

Blaze King stoves and inserts are designed to accommodate a catalytic thermometer. This thermometer's purpose is to show you if the catalytic combustor is active. Always burn the stove in the "Active" or "Operate Catalyst" zone. When the combustor is not active the stove emits smoke and will not be efficient. Contact the Condar Company for the recommended thermometer for your Blaze King unit if you do not know your stove's requirements

 

Models KING, KEI1300, KE1107, and KEJ1101

Item # CC-111 (ceramic)
Measures 7 inches by 9 inches by 2 inches thick, wrapped in a stainless steel can.
Click here to buy now for $277.00

Item # CS-111 (SteelCat upgrade)
Measures 7 inches by 9 inches by 2 inches thick. Click here to learn about the advantages of steel Click here to buy now for $329.00

You may also need to order extra strips of CatGard Gasket measuring 2 inches by 31 inches (Item # 1P350- Qty. 1 -trim to fit) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

Models KEJ1102, KEJ1102P, KEJ1107

Item # CC-604 (ceramic)
Measures 5 inches by 10.5 inches by 2 inches thick, wrapped in a stainless steel can with flange.
Click here to buy now for $275.00

Item # CS-604 (SteelCat upgrade)
Measures 5 inches by 10.5 inches by 2 inches. Click here to learn about the advantages of steel Click here to buy now for $325.00

You may also need to order extra strips of CatGard Gasket measuring 2 inches by 22 inches (Item # 1P346- Qty. 2) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

Model PEJ1006, Ashford, Chinook, and Sirocco

Item # CC-526 (ceramic)
Measures 4 inches by 10.6 inches by 2 inches thick, wrapped in a stainless steel can with flange.
Click here to buy now for $290.00

Item # CS-526 (SteelCat upgrade)
Measures 4 inches by 10.6 inches by 2 inches. Click here to learn about the advantages of steel Click here to buy now for $259.00

You may also need to order extra strips of CatGard Gasket measuring 2 inches by 22 inches (Item # 1P346- Qty. 2) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

Models KING, KE1100, KEJ1300, and PRINCESS INSERT

Item # CC-100 (ceramic)
Measures 7 inches diameter by 2 inches thick, wrapped in a stainless steel can.
Click here to buy now for $202.00

Item # CS-100 (SteelCat upgrade)
Measures 7 inches diameter by 2 inches thick. Click here to learn about the advantages of steel Click here to buy now for $219.00

You may also need to order extra strips of CatGard Gasket measuring 2 inches by 22 inches (Item # 1P346) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

PRINCESS Model (early)

Item # CC-005 (ceramic)
Measures 6 inches diameter by 3 inches thick, wrapped in a stainless steel can.
Click here to buy now for $140.00

SteelCat upgrade not available

You may also need to order extra strips of CatGard Gasket measuring 3 inches by 17 ¾ inches (Item # 1P427) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

Model ROYAL 2100

Item # CC-506 (ceramic)
Set of two combustors (both required), each measures 3.6 inches by 6.1 inches by 2 inches thick.
Click here to buy now for $223.00

SteelCat upgrade not available

You may also need to order extra strips of CatGard Gasket measuring 2 inches by 22 inches (Item # 1P346- Qty. 2) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

Models PEJ1102 and PEJ1003

Item # CC-511 (ceramic)
Measures 3.6 inches by 10.6 inches by 2 inches, thick wrapped in a stainless steel can.
Click here to buy now for $182.00

SteelCat upgrade not available

You may also need to order extra strips of CatGard Gasket measuring 2 inches by 22 inches (Item # 1P346- Qty. 2) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

Model ROYAL HEIR

Item # CC-521 (ceramic)
Measures 3.5 inches by 10.2 inches by 2 inches.
Click here to buy now for $181.00

SteelCat upgrade not available

You may also need to order extra strips of CatGard Gasket measuring 2 inches by 22 inches (Item # 1P346- Qty. 2) to install with this combustor. Click here to order your CatGard. To learn more about gaskets, click here.

 


 

Condar Company and WoodstoveCombustors.com market replacement catalytic combustors and CatGard gasket, but does not offer other replacement parts for these stoves and fireplace inserts.

If an error is discovered in this information, or you have additional helpful information about the installation of replacement catalytic combustors in Blaze King woodstoves, please feel free to contact at Condar's factory in North Carolina.

Prices and specifications subject to change.

To learn more about these stoves, phone Blaze King at 1-509-522-2730.

Text Copyright, Condar Company, Columbus, North Carolina. Images of combustors © Condar Company. All rights reserved.

Images of stoves © their respective manufacturers,
used herein for consumer reference only.


VIEW CART     CHECKOUT

FIND YOUR
COMBUSTOR
Translate Page:

ABOUT OUR
COMBUSTORS

» How They Work
» Operation Tips
» Gasket Details
» Maintenance
» Why Use Catalyst
» When to Replace

NEW STEELCAT
COMBUSTORS

» Available Steel Options
» Advantages of Steel

ABOUT US
» Fast, Easy Shipping
» Exports
» Combustor Warranty
» How They're Made
» Designing New Catalytic
   Products

» Other Condar Products
» Contact Us
» Home

 

“I live in the mountains of Southwestern Montana in a house that's around 3000 square feet, mostly open design. With a new SteelCat combustor installed in my Blaze King KEJ-1102, I'm keeping the main living area of the house at 75 degrees with the stove at its lowest setting. And now I'm getting more than 24 hours of burn-time with a normal load of wood. This stove has NEVER worked so well! I showed my neighbor, who also owns a Blaze King, and he immediately ordered a SteelCat for his stove. The amount of wood and labor I'll save will pay for the new combustor very quickly. Thank you very much for the great product and service.”

Ron Rowe,
Whitehall, Montana


*****

“Got the new Blaze King combustor you sent and it fits perfectly. I just fired up the stove and wow what a difference! It's burning absolutely clean after just 15 minutes, and even set on the lowest air settings is burning hot. Your product is just absolutely awesome!”

Brian Dickey,
Hyde Park, Utah