Optimiser
Position on stove top or stovepipe!
Condar's Optimiser dual zone thermometer! $21.50 value, free with combustor purchase. Please use voucher code OPTI.
Purchase Optimiser here.

1100 Free Standing

CC-308 Condar ceramic combustors for 1100 free standing Elmira woodstove
  • Set of two catalysts each measuring:
    7.4" long x 2.4" wide x 2" thick
    (19 x 6 x 5 cm)
  • wrapped in stainless steel
  • CC-308 (ceramic) $216

1100 Insert

CC-214 Condar ceramic combustor for 1100 insert elmira wood stove
  • Set of two catalysts each measuring:
    7" long x 2.2" wide x 2" thick
    (18 x 6 x 5 cm)
  • wrapped in stainless steel
  • CC-214 (ceramic) $189

1200 Stove, 1400, 1600 Insert*

CC-216 Condar ceramic combustors for Elmira 1200 Stove, 1400, 1600 Insert
  • Set of four catalysts each measuring:
    5" long x 2" wide x 2" thick
    (13 x 5 x 5 cm)
  • wrapped in gasket
  • CC-216 (ceramic) $307

1400 Insert

CC-158 Condar ceramic catalyst for Elmira 1400 insert
  • 6.8" long x 1.9" wide x 2" thick
    (17 x 5 x 5 cm)
  • wrapped in gasket
  • CC-158 (ceramic) $101

1401 Insert

CC-161 Condar ceramic combustor for Elmira 1401 insert
  • Set of two catalysts each measuring:
    6.8" long x 1.9" wide x 2" thick
    (17 x 5 x 5 cm)
  • wrapped in gasket
  • CC-161 (ceramic) $190

1601 Insert

CC-168 Condar ceramic combustor for Elmira 1601 insert
  • Set of two catalysts each measuring:
    28" long x 2" wide x 2.5" thick
    (27 x 5 x 6 cm)
  • wrapped in stainless steel
  • CC-168 (ceramic) $488

1602 Insert and some Early 1600 Inserts*

CC-307 Condar ceramic combustor for 1602 Insert and some Early 1600 Inserts
  • Set of two combustors each measuring:
  • 10.9" long x 2.4" wide x 2" thick
    (28 x 6 x 5 cm)
  • wrapped in stainless steel
  • CC-307 (ceramic) $282

Royal Heir 2100

CC-252 Condar ceramic combustor for royal heir 2100
  • Set of two catalysts each measuring:
    7.5" long x 2.5" wide x 3" thick
    (19 x 6 x 8 cm)
  • wrapped in gasket
  • CC-252 (ceramic) $319

* Double-check which combustor you need by measuring your previous combustor or your combustor housing.